|
|
Post by arch on Mar 17, 2015 15:32:57 GMT
Hi all, I switched my Router over to TalkTalk and although I've no problem accessing the internet wirelessly, I don't seem to be able to access the Router's IP address. I've tried 192.168.1.1 and 192.168.1.0 in FF,IE and Chrome and get the same ''can't be displayed.'' Any thoughts  cheers all. |
|
|
|
Post by nob on Mar 17, 2015 15:50:45 GMT
How about clicking on network via the folder bottom left or control panel and open its web page then log in.
Mine is TalkTalk and its IP is 192.168.1.1
Could it be a firewall stopping it?
|
|
|
|
Post by banjo on Mar 17, 2015 18:14:03 GMT
Provided that the wired side of the router isn't cattle trucked, have you tried resetting the router? Open up a command prompt and try pinging a few IPs while you're at it. It's not unheard of for network cards to retire gracefully.
e&oe
|
|
|
|
Post by arch on Mar 17, 2015 20:08:17 GMT
Thanks fellas, turned out a reboot did the trick.  |
|
|
|
Post by nob on Mar 17, 2015 21:33:31 GMT
Sorted well done.  |
|
|
|
Post by arch on Mar 17, 2015 21:36:39 GMT
Nob, I've just one query.
Is there no way to change Username and p/w when you first access the Router IP?
admin and admin, can they be changed?
|
|
|
|
Post by nob on Mar 17, 2015 21:44:38 GMT
Yep in the router settings Arch.
|
|
|
|
Post by arch on Mar 17, 2015 21:54:21 GMT
Found it Nob, in Maintenance |
|
|
|
Post by nob on Mar 17, 2015 22:32:25 GMT
Well done, you sorted now Arch. |
|
cheers all.
